Eelisa

Digital microscope with polarizer

Technical University of Madrid (UPM)

Research, Teaching, and others (industrial...) activities

AM4115ZTW Dino-Lite digital microscope with polariser, USB connection, resolution of 1.3 megapixels and magnification from 10x to 50x.

Reciprocating Engines Lab

Technical University of Madrid (UPM)

Research, Teaching, and others (industrial...) activities

The reciprocating engines laboratory contains a test bench equipped with a naturally aspirated Otto cycle engine, fitted with test bench and engine control systems, as well as a data acquisition system. The test bench makes it possible to monitor the engine’s operating parameters and its response to the use of different fuel mixtures.

Teaching lab on fuel cells (PEMFC y DMFC) and green hydrogen production via electrolysis

Technical University of Madrid (UPM)

Research, Teaching, and others (industrial...) activities

This laboratory has various illustrative experimental assemblies for teaching purposes: 1) Equipment consisting of a photovoltaic cell which, when illuminated with a spotlight, powers a PEME electrolyser that produces hydrogen. That hydrogen is subsequently sent to a PEMFC-type monocell fuel cell, which produces an electric current that powers a fan. 2) Equipment that functions in

Test bench for DMFC fuel cell and methanol electrolyzer with climate chamber

Technical University of Madrid (UPM)

Research, Teaching, and others (industrial...) activities

Test bench designed and built by PiCoHiMA with a climatic chamber making it possible to regulate the working temperature of the DMFC or the methanol electrolyser up to 80°C and to test these devices with maximum current voltage and intensity of 10 V and 10 A, respectively. It consists of a cylinder of O2 and

Laboratory for fuel cells and alternative fuels with fume cupboard

Technical University of Madrid (UPM)

Research, Teaching, and others (industrial...) activities

Laboratory with a surface area of 46 m2, equipped with a high-flow fume hood, running water and workstations with 220 V 50 Hz power sockets.

Test bench for DMFC fuel cell with climate chamber

Technical University of Madrid (UPM)

Research, Teaching, and others (industrial...) activities

Test bench designed and built by PiCoHiMA with a climatic chamber making it possible to regulate the working temperature of the DMFC up to 80°C. It consists of a cylinder of O2 and another of N2, both gases compressed at 200 bars with a pressure reduction valve, a Bronkhorst EL-FLOW Select O2/N2 mass flow controller,

3D printing station

Technical University of Madrid (UPM)

Research, Teaching, and others (industrial...) activities

3D printing station consisting of an Ultimaker® 3 Extended fused-filament printer with a dual filament extruder and a ZORTRAX® Inkspire high-resolution printer for printing with photocurable resins with a wavelength of 405 nm. The station also has a Formlabs® Autoclave Form Cure curing system.

Potentiostat/ galvanostat with current booster and impedance measurement module

Technical University of Madrid (UPM)

Research, Teaching, and others (industrial...) activities

Autolab® PGSTAT128N potentiostat-galvanostat with additional BOOSTER10A and SCAN250 modules.

Heated plates hydraulic press

Technical University of Madrid (UPM)

Research, Teaching, and others (industrial...) activities

MASINOX MGH-30 hydraulic press with 300 mm × 300 mm heating plates, compressive capacity of up to 600 kg/cm2, temperature regulation up to 250°C and thermal cycle configuration. Water cooling.