Skip to content
Facilities Mechanical properties characterization lab

Mechanical properties characterization lab

Advanced material science and engineeringConnectivitySmart industry and space technologies
LOCATION
Technical University of Madrid (UPM)
Laser centre
Description
The mechanical properties characterisation laboratory has equipment for wear and corrosion, a micro hardness tester, equipment for measuring residual stress and a mechanical testing machine. It also has an ultrasonic bath, cutters, a polisher and a furnace for processing parts. Autolab PGSTAT 128N corrosion analysis equipment: a modular, low-current potentiostat-galvanostat capable of measuring a maximum of 800 mA, with a voltage of 12 V. An MT/30/NI/LIN microtest tribometer. SMT-A/0100: specific equipment for analysing wear by means of pin-on-disc and reciprocating testing (standards ASTM-G99 and DIN 50324). SINT Technology automated equipment for determining residual stresses (hole-drilling system). A 100 kN, model 318.10 MTS test frame with lifting cylinders and oleo-hydraulic breaks for the moving crosshead, including a built-in actuator and load cell. A system for data acquisition and conditioning in fatigue testing. An MXT 30 Matsuzawa Seiki Co. Ltd. micro hardness tester.

Way(s) of collaboration

Sharing rules are available here: https://www.upm.es/recursosidi/infraestructura/laboratorio-de-caracterizacion-de-propiedades-mecanicas/Please read this document to know the sharing rules


CARLOS LUIS MOLPECERES ALVAREZ
Responsable
Grupo: Manufactura Avanzada con Láser; Centro/int: Centro Láser
Technical University of Madrid (UPM)

Get in contact
Type
A scientific or technological infrastructure
Activities
Research, Teaching, and others (industrial...) activities
Load
Unknown
Frequently asked question
Can I put my facility in the catalogue?
Yes, if you are from one of the EELISA member, you can log in and create a page for your facility. It will be then validated by a dedicated person at your institution and published. You can edit it at any time.

What happens when I am contacted?
The catalogue is meant to get in touch and start scientific discussion. There is no obligation to accept the collaboration.

Whom to contact if I would like to get more information about the catalogue ?
Each insitution has at least one contact :

I am from UPM, may I publish on the catalogue?
As UPM has its own local catalogue ( ), you first need to publish your facility on the UPM catalogue and then it will be transferred to the EELISA catalogue with no further action from your side.